Fibre Optic Cable

Industrial Technologies Supply is a representative and an agent in Australia of KDP fibre optic communication cables. KDP is European cable factory with more than 100 years history. ISO 9001 and ISO14001 certificates prove their products quality. We offer a full range of fibre optic cables and supply for Australia: singlemode or multimode, FRP, CST or steel wire armoured, aerial self-supporting, ADSS, tactical cable (HFFR), drop, breakout, air blown micro, distribution, tight buffered, with nylon sheath for termite protection, subsea fibre optic cable and more.

With many years of experience, KDP has traditionally been ranked amongst the renowned European cable manufacturers. But thanks to massive investments from recent years, the company has become one of very few European producers who possess latest technologies.

Here you can download Technical Specifications.

Choose your type of optic cable your project require and click on icon to learn more.

       Duct or conduit protects fibre optic cable from harsh environment. They are buried into the ground and then the cables are air-blown, pulled or pushed into the duct. Duct fibre optic cable must be rigid and flexible enough at the same time to be installed into duct system.

MLT Improved

CLT Improved

MLT Micro

CLT Standard

MLT Standard

        Direct burial fibre optic cables do not require any additional protective covers to be buried directly into the ground. They may be exposed to harsh environmental conditions such as changes in temperature and humidity of the soil.

MLT CST double sheath

CLT CST double sheath

MLT FRP

CLT FRP

MLT SWA

CLT SWA

MLT CST single sheath

CLT CST single sheath

 

        The range of aerial fibre optic cables includes round, flat or figure 8 shape cables with central loose tube or stranded multi loose tubes construction, with fibre reinforced plastic (FRP) or steel rods, with steel wire messenger for self-supporting.

FLAT ADSS

MLT fig. 8

ADSS 15 KN

CLT fig. 8

ADSS 10 KN

ADSS 6 KN

FLAT DROP

FLAT fig. 8

STANDARD

        Fire resistant fibre optic cables maintain circuit integrity for up to 90 or 180 min in the event of a fire and are suitable for indoor or outdoor installation. Typical applications are in vital communication and emergency systems. This includes public buildings, tunnels, metro lines where the cable will need to continue operating during fire. Passed following tests for circuit integrity: IEC 60331-11-1 and IEC 60331-25-1.

Distribution FSC 180

MLT FSC 180

CLT FSC 180

MLT FSC 90

CLT FSC 90

       All dielectric riser fibre optic buffered and module cables. Multi module riser fibre optic cable consists of bundle of micro tubes with optical fibres. Two strength members (FRP rods) are located inside the jacket. These riser fibre optic cables is suitable for FTTX application.

BUFFERED

MODULE

       Fibre optic cable can provide more bandwidth for high-performance networks, offer space saving in datacentre, because they are much thinner and lighter than metal wires. Fibre optic cables are ideal for high performance of datacentres’ equipment.

ACRYLATE

CST

SWA

IMPROVED

STANDARD

NO CSM

IMPROVED WITH FRP

STANDARD WITH FRP

HEAVY DUPLEX

DUPLEX

SIMPLEX